Step 1 From the main menu Go to U> setUp
Step 2 Enter T> Printer-setup
In order to set up a label printer in the Medcom Billing Program there must be a printer available in the printer set-up screen. A labeller can be set-up in any of printer 1, printer 2, or printer 3 as long as it is not currently in use.
Step 3 Enter a name or description to identify the label printer in the description field. Press Enter.
Step 4 Type DELT (for default) in the Port field. Press Enter.
Step 5 Clear entries in the regular and compressed print fields so they are blank.
Step 6 Enter through any remaining Printer Set-up, through printer 3, to the Forms section of the Printer Set-up
Step 7 In the first row, Printer, enter the corresponding number (Printer 1, 2, 3) that you chose.
Step 8 Select the correct paper type (found at bottom of screen) and place the corresponding number in the Paper Type Field
Step 9 Press Page Down and [A] Accept.
The Medcom Billing Program is now set up to use the label printer.
If the label printer does not use a paper size as shown above it may not work with the Medcom Billing Program
Please refer to your Medcom Manual section 5.2.2.5.3.1 SETUP LABEL PRINTER IN MEDCOM
